+1 on the scanner. The scanner must complete initialization but for some or other reason can not do so. Does the LED on the scanner light up at all?...
There was a spring tension issue that caused the waste box and transfer belt shutter that prevents spillage not to open all the way. That was on the...
The problem is that the toner is caking up, even if you replace the cleaning blade the toner will simply stick to the cleaning edge causing the toner...
Seen that happen due to an unearthed vacuum cleaner. On a C1100 I had to replace the shutter motor driver on the main board also due to guys using an...
Yea I am wrong black rust is lighter than red rust so yes oxidation will turn black rust into red rust. I can still be wrong. You will need a lot of...
Shizer. That is something I have never had before. You say it just keeps adding toner to an already full hopper. So its not adding from the hopper to...
Looks like it could be poor primary and or poor secondary transfer.
Print a single demo page and pull the belt out to see how much residual image is...