• adriansto's Avatar
    1 Day Ago
    adriansto replied to a thread Messed up Xerox WCP C3545 in Xerox
    You need to replace the ess nvm pwb - the little board with square yellow battery on it.
    1 replies | 72 view(s)
  • adriansto's Avatar
    1 Week Ago
    adriansto replied to a thread [Misc] Pws 102 display failure in Xerox
    This is working only for Patriot machine using old WCPP version. For Lexington you need to reload all machine software.
    3 replies | 109 view(s)
  • adriansto's Avatar
    1 Week Ago
    Ok, try to load the 61.132.221 software version on customer machine. What paper tray is used for copies and what one for printing ? If when print...
    14 replies | 452 view(s)
  • adriansto's Avatar
    1 Week Ago
    I asked about software version on the old 5755 who jamming.
    14 replies | 452 view(s)
  • adriansto's Avatar
    1 Week Ago
    What system software was on the previous 5755 ? did you tried with the old printer drivers ?
    14 replies | 452 view(s)
  • adriansto's Avatar
    1 Week Ago
    adriansto replied to a thread xerox 4127 error 093-320 in Xerox
    Developer motor not running. - mag roll bearing seized, or - toner blocked insight the trickle duct assy
    1 replies | 111 view(s)
  • adriansto's Avatar
    2 Weeks Ago
    adriansto replied to a thread xerox 4127 error 042-330 in Xerox
    12 volts. Send me mail at stoadis@gmail.com
    3 replies | 165 view(s)
  • adriansto's Avatar
    2 Weeks Ago
    adriansto replied to a thread xerox 4127 error 042-330 in Xerox
    127K52731 - fuser exhaust fan 127K37893 - blower motor.
    3 replies | 165 view(s)
  • adriansto's Avatar
    2 Weeks Ago
    adriansto replied to a thread [Error Code] WC6605 Controller Error 116324 in Xerox
    WorkCentre 6605 Drivers & Downloads
    1 replies | 95 view(s)
  • adriansto's Avatar
    2 Weeks Ago
    adriansto replied to a thread xerox 5755 in Xerox
    Sent you PM two days ago
    1 replies | 99 view(s)
  • adriansto's Avatar
    2 Weeks Ago
    adriansto replied to a thread [Error Code] Xerox 550 in Xerox
    Occurs when the timer function of controller software returns an error. So is time to replace ess nvm pwb. I sent you a mail some time ago. If you...
    23 replies | 536 view(s)
  • adriansto's Avatar
    2 Weeks Ago
    adriansto replied to a thread [Error Code] Xerox 550 in Xerox
    You can try to remove again the ess nvm pwb, remove battery, be sure the batt voltage = 3 - 3.2 volts, put all back and try again the serial...
    23 replies | 536 view(s)
  • adriansto's Avatar
    2 Weeks Ago
    adriansto replied to a thread [Error Code] Xerox 550 in Xerox
    The sys2 = the litlle board with battery you removed. Sys1 is a electronic device which have the correct serial. You need to make same serial to...
    23 replies | 536 view(s)
  • adriansto's Avatar
    2 Weeks Ago
    adriansto replied to a thread [Error Code] Xerox 550 in Xerox
    Follow the link = Xerox Color 550/560/570 Printer with built-in controller Documentation and download administrator guide. Go to Tools menu on...
    23 replies | 536 view(s)
  • adriansto's Avatar
    3 Weeks Ago
    adriansto replied to a thread [Error Code] Xerox 550 in Xerox
    Sorry, you need to make a call to a xerox service.
    23 replies | 536 view(s)
  • adriansto's Avatar
    3 Weeks Ago
    adriansto replied to a thread [Error Code] Xerox 550 in Xerox
    We dont talk here about PagePack option. You need to restore some settings into ess nvm pwb. You need to apply gp4 procedure as it is write into...
    23 replies | 536 view(s)
  • adriansto's Avatar
    3 Weeks Ago
    adriansto replied to a thread [Error Code] Xerox 550 in Xerox
    Read gp4 procedure from service manual You will use the correct data from sys1 pwb as reference data for sys2
    23 replies | 536 view(s)
  • adriansto's Avatar
    3 Weeks Ago
    adriansto replied to a thread [Error Code] Xerox 550 in Xerox
    You need to do the gp4 procedure -serial number syncronization- using sys1 as the pwb with good data. After that restart machine and check for...
    23 replies | 536 view(s)
  • adriansto's Avatar
    3 Weeks Ago
    adriansto replied to a thread [Error Code] Xerox 550 in Xerox
    If you have same 117-325 error then you need to replace the ess nvm module. The software is still into this module flash memory but the chip device...
    23 replies | 536 view(s)
  • adriansto's Avatar
    3 Weeks Ago
    adriansto replied to a thread [Error Code] network controller error in Xerox
    What version ? You find the version on the old configuration report or you can read it from machine status menu.
    3 replies | 118 view(s)
  • adriansto's Avatar
    3 Weeks Ago
    adriansto replied to a thread [Error Code] network controller error in Xerox
    You need to reload machine software.
    3 replies | 118 view(s)
  • adriansto's Avatar
    3 Weeks Ago
    You can buy a new hdd- not from xerox- and install it. Before that you can check the old hdd by putting it into a computer and run some hdd tests....
    2 replies | 133 view(s)
  • adriansto's Avatar
    3 Weeks Ago
    adriansto replied to a thread [Error Code] Xerox 550 in Xerox
    Remove battery from ess nvm pwba for 2 minutes. Put it back and try again. It is wonderful if you have a previously machine nvm's saving. If so,...
    23 replies | 536 view(s)
No More Results

1 Visitor Messages

  1. View Conversation
    Dear sir
    can you tell me which mode of wide format the best
    regards
    mfag
Showing Visitor Messages 1 to 1 of 1
About ricardobres

Basic Information

About ricardobres
Real Name:
Ricardo Brescancini
Country:
Brazil
State/County:
au capitol territory
Where are you from (City, State):
Curitiba
Biography:
I,m Xerox and Canon Techinician
Interests:
dive, soccer, spearfishing, enduro
What Year Did You Start in this Industry:
1988
What was the first machine you worked on:
nashua LTT
Last machine you were formally trained on:
Canon 3200
Gender:
Male

Statistics


Total Posts
Total Posts
151
Posts Per Day
0.05
Visitor Messages
Total Messages
1
Most Recent Message
08-29-2008
General Information
Last Activity
12-20-2014
Join Date
04-24-2008
Referrals
1

2 Friends

  1. adriansto adriansto is offline

    Field Supervisor

    adriansto
  2. alysson alysson is offline

    Technician

    alysson
Showing Friends 1 to 2 of 2
No results to show...