No Recent Activity

1 Visitor Messages

  1. I had to remove the cover behind the up-down tray to replace the sponge rollers located at the exit. I let the tray down by disengaging the gear that drives it. The override sensor arm was broken also. I replaced the parts, put the machine back together, the tray drives down to the bottom of it's range. The tray motor does not reverse to drive the tray up. Is the height sensor the one that looks like a hockey stick? If it is it looks ok to me. Thanks
Showing Visitor Messages 1 to 1 of 1
About scepter2112

Basic Information

About scepter2112
Real Name:
James
Country:
United States
State/County:
us new york
Where are you from (City, State):
NY NY
Interests:
Outdoors/Old movies
Occupation:
Troublemaker
What Year Did You Start in this Industry:
86
Favorite Manufacturer:
Ricoh/Canon
Most Hated Brand:
Mita
What was the first machine you worked on:
NP250
Last machine you were formally trained on:
LD190
Gender:
Male

Contact


This Page
http://www.copytechnet.com/forums/members/scepter2112.html?s=0f603afd4e0e4f50ca34e0f8dfeec28b
Instant Messaging

Send an Instant Message to scepter2112 Using...

Statistics


Total Posts
Total Posts
73
Posts Per Day
0.02
Visitor Messages
Total Messages
1
Most Recent Message
08-09-2009
General Information
Last Activity
05-01-2017
Join Date
05-02-2009
Referrals
0
No results to show...