I can't tell you which models, but once they go into an error code the Settings Menu may become inaccessible. And if you replace the printhead while...
Hello all, I've been out of the copier repair business for nearly 10 years at this point and it looks like finding Kyocera firmware is impossible if...
I've never seen the official bulletin, but it's no small task. On later production models they installed a new style front cover with holes to access...
If I were to guess, I'd guess that the U021 reset cleared the speed upgrade code, so it won't accept that toner, and it will run at 25ppm. I suspect...
So just to clarify: That line is crossfeed? If yes, start with the simplest of solutions: clean every rubber, metal, or plastic roller thoroughly. I...
I agree on this one. We have had a couple cases on high speed Konica Minoltas, in which fanning the paper made all the difference. Between us techs,...
Are you sure about that model number? the eStudio 305 is a Loire (Toshiba build, not Lexmark), and I can't find any reference to a Lexmark 338 on the...