I go by Paul T because there were four Paul's working here, and first name, last name initial kept the office staff clear who was who.
I would feel honored though to be your friend now - the invite will be forthcoming.
just an old joke between me an and old friend
that emifrated many years ago
hes name was paul.t
i need to ask you,does VLADIVOSTOK means something to you?
I am new in the Sharp Ar 335 repair world,thanks for the tip on error U2 00 .I have reseated chips on the board at the lower right rear of machine and on the adf.The U2 00 code reoccurred again today. which board and exactly where is it located should I focus on and also do you know of some where I may purchase
salvage parts for this model ( like the board in question)
Hi paul, just want to say thanks (again) for your help
tc 15 for lcc
will do, thanks so much for your help..
My name's Pete montgomery.
Just saying G'day.
I'm an Independent Xerox Tech In Sydney Australia.
7 years at Xerox and 4 years self employed.
I've just signed up here and found that you're a real contributor to this site so I decided to "Befriend" you.
I have 2 ar507's that the drums are covered with toner specks, when you wipe the toner from the drum the coating is gone, these are not oem so on one copier I replaced drum and blade and within 200 copies they came back. Any thoughts?
Thanks, my main background is IT. But I am spending MUCH more time on the Ricoh copier side of things.
thanks for that I should have thought of it my self but thanks for the reminder
Master Of The Obvious
Colorado Copier Solutions
just one copy??