Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2
  1. #1
    Technician
    Join Date
    Sep 2014
    Location
    Montreal, QC
    Posts
    34
    Rep Power
    20

    MFX-3590 Dirty press roller

    Hello all !
    I have a bunch of MFX-3590 in one location that have black build-up on the pressure roller. I've replace the fuser a few time already. If I take out the fuser and scrub the pressure roller problem goes away for a couple of weeks. Firmware is at H5A0A0, they dont use envelop mode on the fuser and more than 95% is printed on plain paper.
    Waiting for suggestion, Thanks in advance.

  2. #2
    Trusted Tech 50+ Posts
    Join Date
    Aug 2014
    Location
    port huron,michgan
    Posts
    76
    Rep Power
    20

    Re: MFX-3590 Dirty press roller

    Make sure the new fusers have 2 white dots. Muratec will give you
    a new one covered under warranty. We replaced about 15 under warranty.
    They have had issues with these fusers .

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here