Results 1 to 3 of 3
  1. #1
    Technician
    Join Date
    Oct 2011
    Posts
    16
    Rep Power
    26

    Muratec 2850 Duplex Issue

    We have a Muratec 2850 that when it does a duplex scan the second side fonts get all glitched up with the copy. We replaced the document feeder and nothing. We are now thinking it is the board but can't figure out why, if that is the case, it would only glitch on the back side of the page and not also the front. We appreciate any help you can give us!

    Vince

  2. #2
    william696
    Guest

    Lightbulb Re: Muratec 2850 Duplex Issue

    Try replacing (or turning around) the scanning glass for the duplex side of the ADF by opening the ADF cover and raising the part labeled "A2". This exposes the scanning unit for the 2nd side. I have had the same indication when wear marks become etched into the Glass covering the scanning unit.

    Hope this helps.

  3. #3
    Technician
    Join Date
    Oct 2011
    Posts
    16
    Rep Power
    26

    Re: Muratec 2850 Duplex Issue

    Thank you...we will try it and let you know...

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here