Has anyone tried to install Konica Minolta C284 firmware in muratec C2880. No firmware available from Muratec.
Thanks: 0
Likes: 0
Dislikes: 0
Has anyone tried to install Konica Minolta C284 firmware in muratec C2880. No firmware available from Muratec.
I didn't even realize there was muratec brand version of this KM series.
I don't know about the firmware but I would look in service mode at the current firmware it has and see if it is the same as the KM version. There should be checksum values that you could compare to see if it indeed the same exact one.
Sent from my DROID BIONIC using Tapatalk
Turns out that three files were different but the KM firmware was loaded in & works fine. Still has Muratec splash screen.
Under ordinary circumstances, the KM firmware will not work with the Muratec machines.Originally Posted by Glenn.ca
Turns out that three files were different but the KM firmware was loaded in & works fine. Still has Muratec splash screen.
Just out of curiosity, why would you want to update the firmware? This machine hasn't been out quite a year yet.
"The difference between a successful person and others is not a lack of strength, not a lack of knowledge, but rather in a lack of will."
--Vince Lombardi
Copier had a lot of wierd jamming issues, firmware had 280 fixes. not available from Muratec.
Are there any bulletins that show what was fixed on KM's site?
"The difference between a successful person and others is not a lack of strength, not a lack of knowledge, but rather in a lack of will."
--Vince Lombardi
Yes, If you don't have access I can send it to you (when I figure out how to)
If you could, that would be greatly appreciated. Thanks!
"The difference between a successful person and others is not a lack of strength, not a lack of knowledge, but rather in a lack of will."
--Vince Lombardi
Posting Permissions
Reply With Quote
Bookmarks