anyone figure out the 36 tooth gear for these fusers yet. i was using the f320 hr gear but now discontinued. it has to cross somewhere else maybe a 36 tooth hp.
thanks
Thanks: 0
Likes: 0
Dislikes: 0
anyone figure out the 36 tooth gear for these fusers yet. i was using the f320 hr gear but now discontinued. it has to cross somewhere else maybe a 36 tooth hp.
thanks
Do you have a photo and dimensions? I have a vast selection of scavenged gears ...
Bore:
Pitch:
Width:
=^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
See attachmentOriginally Posted by blackcat4866
Can you include a mm scale in the picture? It's really hard to measure without a reference. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
IMG_20150429_083431_259[1].jpgIMG_20150429_083245_162[1].jpgHere you are. Thanks
I don't have a match for you but here are the specs (I converted the dimensions since these are metric gears):
Module: 1
Pitch Diameter: 36mm
Teeth: 36
Bore: 28.5mm
Face Width: 8mm
Circular Pitch: 3.14
I have ring gears in 1 module, with 26 and 32 teeth, but not 36.
There are many companies that custom make gears if you have the bucks. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Thanks blackcat
Posting Permissions
Reply With Quote
Bookmarks