I have a dead docucolor 250 changed all main power boards and still no response any solutions
I have a dead docucolor 250 changed all main power boards and still no response any solutions
Welcome to the site.
--
Snap, Crackle, Aneurysm!
Welcome
if u need help post your question to the correct forum
Live for yourself and you will live in vain. Live for others, and you will live again
cross check power supply assembly, MCU board , MCU PWB , ESS board, ESS PWB.... if all good then try open all door of machines open remove all toner cartridges, pull out all drawer of machines keeping all doors ( left, right, front, toner cartridges, all trays ) open the try switching on machine
Welcome to the Forum. Hope your thread had been solved.
cross check all boards and wiring if all is good and machine still not working then try one thing, open all the doors of machine remove all toner cartridge, open all trays (drum, ibt, transfer unit ie fuser drawer), all trays, left door, right door everything then switch on machine
Bookmarks