I have a E-studio 6530C , I want to run calibration in 05 mode , Simulation 2742 , It does not respond. This works on a 6560C that I have and I thought they were the same codes ?
Thanks: 0
Likes: 0
Dislikes: 0
I have a E-studio 6530C , I want to run calibration in 05 mode , Simulation 2742 , It does not respond. This works on a 6560C that I have and I thought they were the same codes ?
Thanks for joining our site, we look forward to seeing more posts from you in the future.
--
Snap, Crackle, Aneurysm!
Hi
Please post a new thread on a Toshiba forum.
http://www.copytechnet.com/forums/toshiba/
welcome_6.gif
Practice makes perfect
If it ain't broke, don't fix it
A picture is worth a thousand words
If you want something done right, you have to do it yourself
Nope. It's a different series of machines.
... and welcome! =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Posting Permissions
Reply With Quote
Bookmarks