Results 1 to 9 of 9

Thread: New Tech

  1. #1
    Guyinthechair_1.0
    Join Date
    Mar 2019
    Location
    Half Tree Hollow
    Posts
    5
    Rep Power
    0

    New Tech

    Hi everyone,

    Im new to this forum.
    Ive been an assistant to a tech for the past few years, and have now moved up to try and make headway in the electronic industry via a Copier career.

    My job entails repairing, maintaining and installing copier imaging and printing solutions.
    The only copiers I have worked on are Canons. However i also work with printers as well as other electrical hardware. basically anything electronic to do with the company I can work on. Its quite fun and really interesting, but seems like im a 'jack of all trades master of none'.

    Joined the forum in hopes of expanding my knowledge, and hopefully get to help others as well.
    I work on St Helena Island, which is fairly isolated, an has its own unique problems such as ordering replacements and equipment tends to double in cost. Most of my knowledge is handed down by the senior tech,(quite old information),on copiers as there are no copier techs courses available here. so problems tend to be resolve by tonnes of research and getting familiar with service manuals, when I can find them.

    would love to progress and do some canon service tech courses in the near future to make the company more efficient. But we'll see how that goes.

    Thanks for having me.

  2. #2
    Retired 5,000+ Posts slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    9,010
    Rep Power
    195

    Re: New Tech

    Glad to have you join us.

  3. #3
    Service Manager 2,500+ Posts
    New Tech

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    4,151
    Rep Power
    66

    Re: New Tech

    Welcome!
    You have IMHO a good start.. hopefully the tech you were working with at some time turned over the screwdriver and sat back and observed...

    I found this is one of the better ways to break a noob into the field..

    but from your post I have no doubt you will succeed and be a benifit to others here as well!

  4. #4
    Master Of The Obvious 10,000+ Posts
    New Tech

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    17,059
    Rep Power
    284

    Re: New Tech

    Welcome!

    I just came across my original Quest binder from 1992. It's not very current, but most of the concepts remain the same. If you Private Message me a destination I'll scan the binder to a PDF. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  5. #5
    Service Manager 1,000+ Posts bob marley's Avatar
    Join Date
    Jan 2012
    Posts
    1,113
    Rep Power
    31

    Re: New Tech

    Welcome
    Live for yourself and you will live in vain. Live for others, and you will live again

  6. #6
    Field Supervisor 500+ Posts
    New Tech


    Join Date
    May 2009
    Location
    Concord, NH
    Posts
    523
    Rep Power
    31

    Re: New Tech

    Welcome Aboard.

  7. #7
    teacher-guide-expert-guru 2,500+ Posts
    New Tech

    zoraldinho's Avatar
    Join Date
    Mar 2008
    Location
    SVN
    Posts
    4,607
    Rep Power
    88

    Re: New Tech

    Practice makes perfect
    If it ain't broke, don't fix it
    A picture is worth a thousand words
    If you want something done right, you have to do it yourself


  8. #8
    teacher-guide-expert-guru 2,500+ Posts
    New Tech

    zoraldinho's Avatar
    Join Date
    Mar 2008
    Location
    SVN
    Posts
    4,607
    Rep Power
    88

    Re: New Tech

    Let's make your rep power green again.
    Practice makes perfect
    If it ain't broke, don't fix it
    A picture is worth a thousand words
    If you want something done right, you have to do it yourself


  9. #9
    Senior Tech. 2,500+ Posts NeoMatrix's Avatar
    Join Date
    Nov 2010
    Location
    Sunshine State QLD.
    Posts
    3,084
    Rep Power
    78

    Re: New Tech

    G'day from downunder....
    What if we could count the stars... , what number would you stop at...?"
    [Exchange manual acquisitions, PM's CTN members only. ]
    [] |N | | o | M | Δ | t | π | | x | []

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here