Thanks: 0
Likes: 0
Dislikes: 0
I've been a laser printer engineer for over 10 years and now our company is moving into copiers. We're in talks with olivetti for a possible dealership and I’m heading to England next week to train on the mf551/651. I’m hp qualified on the printers but have never touched a copier, I guess I’m just wondering has anyone else made the transition from printers to copiers and is it difficult?
Cheers
Jaime
Welcome
--
Snap, Crackle, Aneurysm!
In my experience most printer service is about swapping out cartridges/units. As the years have passed, more and more of copier service is about swapping out units. You may have to add to the depth of your print engine theory/knowledge to make the transition to copiers.
You'll have a head start on me, though, because you'll have some networking basics. I had no networking knowledge at all in the beginning.
The best thing you can do is take advantage of all the resources that you have available right here at Copytechnet. I'm sure you'll do just fine. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Welcome to the family.
Canon Copier Repair Service. Sales, Parts & Toner. NYC/NJ area. Contact:East Coast Imaging Solutions,LLC
Welcome my friend.
Yes, I am a nerd.
Gaming PC - check. Raspberry Pi - Check. Custom ROM on phone - check. Thick glasses - check.
Welcome
Welcome aboard
welcome to xerographie engineer.. -^
Reply With Quote
Bookmarks