Results 1 to 10 of 10
  1. #1
    Junior Member vcamper's Avatar
    Join Date
    Sep 2010
    Location
    Orlando, FL
    Posts
    4
    Post Thanks / Like
    Rep Power
    0

    Cool I hope I am welcome here!

    I am not a technician. I sell copier circuit boards, although I am not here to advertise. I am strictly here to keep up to date on what's going on in the field. I don't always have a direct link to the men and women that are the true consumer. I welcome any questions anybody might have about the availability of circuit boards from my company or I can also direct you to my companys free technical support if you so desire.


  2. #2
    Master Of The Obvious 5,000+ Posts


    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    10,594
    Post Thanks / Like
    Rep Power
    158
    You'll be very welcome. To most of us in the field, board level repair is a mystery we just don't have the time to investigate.

    One of my more interesting board level non-repairs was a Canon NP-6551. It produced a door open indication. I discovered a loose leg on one of those 200+ leg chips. When I pressed the chip with my thumb, the indication went away. I had the crazy idea that I'd try to re-touch the solder joint. Then I noticed that the tip of my soldering iron is as wide as three of these miniscule legs.

    It took a week to get the board. In the meantime I taped a coil spring to the back cover, to apply just a little pressure to the top surface of the chip.

    Welcome. We'll be glad to hear your opinions. =^..^=

    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.


    blackcat: Master Of The Obvious =^..^=

  3. #3
    Field Supervisor 1,000+ Posts


    nmfaxman's Avatar
    Join Date
    Feb 2008
    Location
    Albuquerque
    Posts
    1,443
    Post Thanks / Like
    Rep Power
    40
    Welcome!
    A board information share will help.

    Why do they call it common sense?

    If it were common, wouldn't everyone have it?

  4. #4
    Administrator 500+ Posts Aneurysm's Avatar
    Join Date
    Jan 2005
    Location
    New York
    Posts
    545
    Post Thanks / Like
    Rep Power
    100
    Welcome to the site, If you have a company site you can add it to the Links Directory.


    --
    Snap, Crackle, Aneurysm!

  5. #5
    Service Manager 100+ Posts Rudi's Avatar
    Join Date
    Jun 2007
    Posts
    249
    Post Thanks / Like
    Rep Power
    17
    Welcome aboard , we certainly need someone like you around.


  6. #6
    Trusted Tech 50+ Posts
    Join Date
    Sep 2009
    Location
    Tacloban
    Posts
    52
    Post Thanks / Like
    Rep Power
    0
    greetingsss


  7. #7
    Field Supervisor 1,000+ Posts RRodgers's Avatar
    Join Date
    Jun 2009
    Location
    San Bernardino
    Posts
    1,891
    Post Thanks / Like
    Rep Power
    35
    Quote Originally Posted by vcamper View Post
    I am not a technician. I sell copier circuit boards, although I am not here to advertise. I am strictly here to keep up to date on what's going on in the field. I don't always have a direct link to the men and women that are the true consumer. I welcome any questions anybody might have about the availability of circuit boards from my company or I can also direct you to my companys free technical support if you so desire.
    I'm cool with ya as long as you don't beg for firmware or manuals as your first post.

    Color is not 4 times harder... it's 65,000 times harder. They call it "TECH MODE" for a reason. I have manual's and firmware for ya, course... you are going to have to earn it. (I'm arrogant LOL)

  8. #8
    Junior Member vcamper's Avatar
    Join Date
    Sep 2010
    Location
    Orlando, FL
    Posts
    4
    Post Thanks / Like
    Rep Power
    0
    Hytec is authorized by more OEMs that any other circuit board repair center, so we should be good with firmware and manuals. Will you still be cool with me if I remind you about our free techncial support?


  9. #9
    Field Supervisor 1,000+ Posts RRodgers's Avatar
    Join Date
    Jun 2009
    Location
    San Bernardino
    Posts
    1,891
    Post Thanks / Like
    Rep Power
    35
    Quote Originally Posted by vcamper View Post
    Hytec is authorized by more OEMs that any other circuit board repair center, so we should be good with firmware and manuals. Will you still be cool with me if I remind you about our free techncial support?
    Sounds good to me.

    Color is not 4 times harder... it's 65,000 times harder. They call it "TECH MODE" for a reason. I have manual's and firmware for ya, course... you are going to have to earn it. (I'm arrogant LOL)

  10. #10
    Field Supervisor 500+ Posts tmaged's Avatar
    Join Date
    Oct 2008
    Location
    Center of my Universe
    Posts
    838
    Post Thanks / Like
    Rep Power
    21
    We've used your services before & been very pleased.
    You'll find a pretty good knowledgebase here. There are some talented individuals here that are eager to help as long as you've made an effort to help yourself. Obviously your situation is a little different, but you get the drift.

    Hope that helps !
    -Tony


    www.dtios.com
    Become a fan on Facebook

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here