toshiba estudio350

[mac12681]

Hows it going was wondering if you could help me out with a little problem I'm having. I have a toshiba estudio350 and I am getting f100 and then a f105 error message. I have restarted the machine with the 08 start and entered the 690 code and have rebooted the machine and it seems to work for awhile then goes back to the same thing. Is there anything i can do?

[mac12681]

Can someone help me with the above problem

[JustManuals]

This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from
Just Manuals | The Internet's largest collection of manuals | Instant Downloads


Paul@justmanuals.com

[Mr Spock]

Replace hard drive and reload firmware.

[nazmi_exa]

try to format your HDD by pressing 3 and clear..then on machine.. key in 3 and press start.. then format it..08-690-2..then ..also 08-690-2

[mac12681]

nazmi_exa on your reply were do i start the 3 and clear part

[Mr Spock]

If you do clear + 3 then you will have to reload the firmware as this wipes the drive.

[dosolan]

Hows it going was wondering if you could help me out with a little problem I'm having. I have a toshiba estudio350 and I am getting f100 and then a f105 error message. I have restarted the machine with the 08 start and entered the 690 code and have rebooted the machine and it seems to work for awhile then goes back to the same thing. Is there anything i can do?

[mac12681]

thanks mr spock for your help ithink im just going to buy a new hard drive woill i still have to do all that as well when i do

[mac12681]

by the way do you know a good place to get one or which would be a better one to replace this one