Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    Junior Member
    Join Date
    Mar 2011
    Location
    Jefferson City, MO
    Posts
    3
    Rep Power
    0

    Question Toshiba e-Studio 55 with E55 error

    Hello everyone!
    I have a Toshiba ES55 I've been working on that keeps throwing an e55 error whenever the finisher is connected to it. No finisher = no problem. I remember seeing a bulletin on this at one time but it looks like Toshiba has added this to the dead machine pile and I can't access bulletins on it anymore. I think it had something to do with the cassette feed? I checked that all paper sizes and paper were correct and in the correct position in the trays. I tried the finisher on another machine and it worked fine. Replaced the finisher interface board on the copier (the little 2" x 2" plug in board). Thats about it. Any ideas on what to try next.

    Thanks for any help,
    James

  2. #2
    Junior Member
    Join Date
    Mar 2011
    Location
    Jefferson City, MO
    Posts
    3
    Rep Power
    0
    Okay I lucked out. Went back and tried again today. Turned out it was the top cassette paper lift motor, even though I was running paper out of the LCF. Go figure.

  3. #3
    General Troublemaker 250+ Posts ddude's Avatar
    Join Date
    Feb 2009
    Location
    Bridge, Under
    Posts
    473
    Rep Power
    36
    Good to hear that you found the problem!

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here