IR 2270 paper level control

[garbanius9]

hi i just want to ask how to control paper level because if cassette is full printer shows that its emty

[prntrfxr]

Post your question in the Canon forum if you want a faster reply. This is the newbie welcome forum. Welcome, BTW.

[charm5496]

hi i just want to ask how to control paper level because if cassette is full printer shows that its emty

There are a combination of sensors, arms and levers that measure the amount of paper in each tray. Check to make sure your tray is not cracked or broken, and do you hear a ratcheting sound when you push the tray into the machine? If you do not then a new pick up assembly might be needed as well.

[ernesto]

HI

<Symptom>
When the machine is left unattended for a period of time, Pick-Up Delay Jams or lifter failure (i.e., failing to move
up) can occur when the machine is turned on the first time (e.g., in the morning).
<Cause>
The friction in the area of contact between the Lock Cam and the Leaf Spring increases, preventing the 46T Gear
from rotating even when the Pick-Up Solenoid goes on (or, the Gear starts to rotate after a delay) and ultimately
causing Pick-Up Roller or Lifter operation failure.
<Factory measures>
Add a roll to the Cam surface to decrease the friction between the Lock Cam and the Leaf Spring and in addition,
increase the force of the Spring to raise the latitude.

FB6-3392-020 spring leaf

FB6-7078-000 cam lock

FF6-2397-000 gear 46T