About to Upgrade My Print on Demand Service

[Rotexy]

Hello All,

I just joined the forum and would appreciate whatever advice I can get from the PROs. I am a Graphic Designer and currently run a Print on Demand service for my Clients but the demand is growing and I am thinking of upgrading my Equipments to much faster Digital Printers. My current equipments are (Xante CL30 HC, Oki C9650 hdtn and Oki C9850 hdtn with inbuilt Fiery 8e).

Because I personally finance this I have been researching Refurbished Konica Minolta 6500 and I found one for a bargain with the following specs

Bizhub C6500 Copier (with 492,000 impressions)

FD-501

Multi-Folding/Punch/Post Inserter
SD-501 Saddle-Stitch Booklet Maker Retail
RU-503 Relay/Buffer Pass Unit Retail Price:
DF-609 Reversing Automatic Document Feeder (RADF) Unit

PF-602

Paper Feed Unit Retail
IC-305 External Fiery Print Controller
All this for reasonable price.

My question is what is your impression about the C6500, it as all the finishing unit I need to boost my sales, how good is the print out (my current printers print at 1200 X1200 dpi but the KM C6500 prints at 600 X 600 dpi), is there any difference in the print out compared to the KM C6000? I have also seen some KM C6501 but the price is rather too high as I am only getting the main Printer without finishing extensions like the one listed above.

[Aneurysm]

Welcome aboard Rotexy.