Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 5 of 5
  1. #1
    Junior Member
    Join Date
    Mar 2013
    Location
    Sierra Vista, AZ
    Posts
    2
    Rep Power
    0

    Sharp MX-M283N U2-90 Codes

    Have a MX-M283N with U2-90 Code. Replaced PCU and PCU flashrom still cannot get the code to clear. When we reset the code the copier will start up and go in to CQ adjustment before the code comes back. The copier has around 60k on it.
    Any suggestion



  2. #2
    Administrator 500+ Posts Aneurysm's Avatar
    Join Date
    Jan 2005
    Location
    New York
    Posts
    900
    Rep Power
    100
    Welcome to Copytechnet.com, the best Copier, Printer, MFP tech site on the internet!

    --
    Snap, Crackle, Aneurysm!

  3. #3
    Field Supervisor 500+ Posts DWise's Avatar
    Join Date
    Apr 2010
    Location
    North MS
    Posts
    899
    Rep Power
    29

    Re: Sharp MX-M283N U2-90 Codes

    Welcome to CTN!!

    Try posting your question in the correct forum (Sharp) for help with your problem.

    Do for one what you wished you could do for everyone. - Andy Stanley

  4. #4
    Service Manager 10,000+ Posts
    Sharp MX-M283N U2-90 Codes

    JustManuals's Avatar
    Join Date
    Jan 2006
    Location
    Las Vegas, NV
    Posts
    10,041
    Rep Power
    141

    Lightbulb Re: Sharp MX-M283N U2-90 Codes

    This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from:

    Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


    Paul@justmanuals.com



  5. #5
    Senior member of CRS 2,500+ Posts
    Sharp MX-M283N U2-90 Codes

    ZOOTECH's Avatar
    Join Date
    Jul 2007
    Location
    Insane Diego, CA
    Posts
    2,963
    Rep Power
    82

    Re: Sharp MX-M283N U2-90 Codes

    Quote Originally Posted by shoule View Post
    Have a MX-M283N with U2-90 Code. Replaced PCU and PCU flashrom still cannot get the code to clear. When we reset the code the copier will start up and go in to CQ adjustment before the code comes back. The copier has around 60k on it.
    Any suggestion
    You probably have a bad EEPROM, not a flash rom. Save any data and counters that you can and replace EEPROM.

    "You can't trust your eyes, if your mind is out of focus" --

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here