Thanks: 0
Likes: 0
Dislikes: 0
Hi new to this forum and new The problem we have also ne to konica Minolta machines
We have a Konica Minolta bizhub 6500e
The developer units were just changed and we tried to restart
on starting up The touch screen is now totally frozen ( it was working before developer unit change)
even going to the calibration screen does not allow any input
It seems the machine has locked itself down
Can anyone help this is an urgent problem as you can imagine no machine
Thanks
Welcome Aboard!
--
Snap, Crackle, Aneurysm!
Welcome
There are 10 types of people in this world, those who understand binary maths and those who don't
you are most welcome
Glad to have you join us.
Welcome!
To get the attention of the Konica Minolta specialists, instead of posting in Newbie Check In, you might start a new thread in Forum > Konica Minolta > start a new thread.
Just a thought =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Posting Permissions
Reply With Quote
Bookmarks