anyone know what this code actually is , Got a good customer with odd ball machine , Would like to help them out THANKS
anyone know what this code actually is , Got a good customer with odd ball machine , Would like to help them out THANKS
flashing exp.
LED 0
0401 101000001 exposure sensor voltage
(EXP_SE) does
not react or is
de-activated after
switching on the
exposure
Check exposure supply
04PBA01 (fuse)
scour lamp connectors
Check exposure lamp 04E1
Check exposure sensor
04PBA02 with SDS test
+2, -4
Check wiring
Check main controller
22PBA01 (See 22 Con.
I Used To Live To Fix Things Now i Fix Things To Live
thank you very much
ok I went to see this printer, I turned it on it came ready, I inserted a print to copy and it scanned it thru, The paper roll started to feed and it feed up to the reg sensor, the exposure lamp came on for 2 seconds and then it showed the 0401 error code. I checked the fuse and the connectors, all good. Can anyone tell me what should I be looking at next. Where is the sensor that sees the exposure lamp being on. I think that is the problem the machine never sees the lamp turning on and being lit Thank You
Bookmarks