Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 6 of 6
  1. #1
    Senior Tech 100+ Posts
    Join Date
    Mar 2009
    Posts
    165
    Rep Power
    32

    OKI C5450 drum missing

    Hi everyone,

    I've got a C5450 in for service that shows 'Error 341 - Magenta Drum Missing'. I've replaced the drum, and checked the obvious like lose cables, connectors etc but I can't see anything that would explain it. I've desperatly googled for a service manual, but the only one I can find says nothing else than 'Yes, this error exists'...

    Does anyone have a real service manual for the 5400-series? Or better yet, does anyone know what the problem is?
    Peace sells, but who's buying?

  2. #2
    Senior Tech 250+ Posts PinevskiS's Avatar
    Join Date
    Jul 2009
    Location
    SKOPJE
    Posts
    284
    Rep Power
    0
    HI.
    I have this problem whit oki c 5450.You must to check contact on DRUM UNIT with board ,mabye the contact (who similar on spring is broken ) and DRUM UNIT don't have contact with board.

  3. #3
    Senior Tech 100+ Posts
    Join Date
    Mar 2009
    Posts
    165
    Rep Power
    32
    Thanks for your reply!

    Yes, I did check it, where it connects to the left side board. The drum connectors have spring-like arms that connects the drum connectors to the board, and I cleaned those surfaces. Unfortunally I don't have the proper gear for measuring the components, but that could be one solution.

    Have you solved your problem?
    Peace sells, but who's buying?

  4. #4
    Senior Tech 250+ Posts PinevskiS's Avatar
    Join Date
    Jul 2009
    Location
    SKOPJE
    Posts
    284
    Rep Power
    0
    Yes i solved the problem check spring who hatch on board contact

  5. #5
    Senior Tech 250+ Posts PinevskiS's Avatar
    Join Date
    Jul 2009
    Location
    SKOPJE
    Posts
    284
    Rep Power
    0
    THIS IS MY E-MAIL sasopine@yahoo.com

  6. #6
    Senior Tech 100+ Posts
    Join Date
    Mar 2009
    Posts
    165
    Rep Power
    32
    Great, thanks a lot!

    I solved my problem yesterday too. I had another OKI printer, a C3200, that I could use for spare parts. I changed over the "drum connector card" (for lack of a better word), the card on the left side of the printer. That alone solved the problem, so obviously there's a damaged component there somewhere. I'll try and figure out which one it is and replace it.
    Peace sells, but who's buying?

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here