Thanks:
0
Likes:
0
Dislikes:
0
-
Trusted Tech
50+ Posts
- Rep Power
- 32
INSTRUCTIONS
Whilst holding down both the “On-Line” and “Cancel” buttons turn the mains power switch on.
--You will see the message "Download mode press online key"
Hold down the “Menu” key for about 7 seconds
As soon as (immediately!) the message "Uncheck consumable mode" comes up press the “Enter” button.
--You will see "Select Test Mode”
“EDC Mode”
Press “Enter” again
--You will see “Press access key”
Press “Cancel” twice
--You will see “EDC Mode”
“Motor Test”
Press Right key “ Seven (7) times:
--You will see “EDC Mode”
“Maintenance”
Press “Enter”
--You will see “Maintenance”
“Imaging Unit”
Click right
“Fuser”
Click right
“Transfer Roll”
Click right
“MP Pickup”
Click right
“Tray1 Pickup”
Pressing “Enter” on any of these and you will see “Initializing” … “Initialized”
After initializing the parts needed, restart the printer.
NOTICE – “TRANSFER BELT” IS NOT IN THE LIST ONLY “TRANSFER ROLL”
-
Tried it, but this didn't work. It shows the page count and that's as far as you can get. Is there a combo of buttons to push? G
-
This didn't work either; can't get the enter key to get me to the EDC Mode. Just goes to Initializing.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks