Thanks: 0
Likes: 0
Dislikes: 0
Hello, Please how to Enter the TECH MODE of Samsung CLX-3175, there no key pad in my printer just menu and left/rigt arrows and stop , start buttons,
Please also tell me which is the best ckt and program to read/write the EEProm of this printer or how to Reset the toner CHIP ?
THANKS.
This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from
Just Manuals | The Internet's largest selection of manuals | Instant Downloads
Paul@justmanuals.com
Press: Menu, #1934, Menu, "Tech Mode <Tech Mode>" OK. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Thanks for your help, as i told in my POST there is no numeric keys in my printer,just the big menu key with left/right arrow and two start one for color and the other is for black copy.please need help for how to reset the Toner chip also.
THANKS
Then it's not a CLX-3175. Could it be the printer engine CLP-315?
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
My friend it is CLX-3175 simple with out fax and networking, I download CLX-3175 driver and Smart panel from SAMSUNG site and it works fine, if it is other model then how can it works with CLX-3175 driver ?
This is a CLX-3175. You must have something else.
Sometimes if you use the wrong print driver it can work. Not consistently, but its possible.
MFP.JPG
Control Panel.JPG
I think I'm done with this conversation.
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Thanks blackcat for your kind help, It is not a MFP it is in Black color and simple CLX 3175, I you search samsung web you will find CLX 3175 in black color and the Panel is with out numeric keys,
THANKS A LOT FOR YOUR PRECIOUS TIME, GOOD BLESS YOU.
Hello, I also have a Samsung CLX-3175, and it's without a keypad, but you can enter Tech mode by clicking certain keys in sequence, I finally get into tech mode, although what I wanted to do was to reset the page counter to STOP the 'Empty Toner' error, I cleared page CNT, but to no effect so if anyone here experienced with tech mode, can please tell me what to do from there I will appreciate it!
In fact It's possible to enter the password once you get thereby clicking LEFT and RIGHT, right moves up the count and Left moves down, so Right, goes 1, 2, 3 ... so one, and left goes 0, 9 ... 1, after you enter 1934, you have to click OK each time you enter a number.
Last edited by ic3cold; 10-07-2011 at 07:14 PM. Reason: add more info
Random I've had this before and had to work it out, literally just went to one again expecting there to be a number pad and have fallen into the same trap.
ic3cold
How do you get into tech mode its Menu ID copy something or other isn't it?
Sidenote: Is this a UK thing or what? Even the service manual I have just says to type the numbrs in.
Reply With Quote
Bookmarks