Quote Originally Posted by mrizer View Post
To enter the Tech Mode, press “ Menu + Up + Left + OK + Right + Stop + Menu” in sequence, and the LCD briefly displays ‘Tech Mode’, the machine has entered service tech mode.

Although I am quite sure there is no rest for the transfer belt. The new belt will come with a Chip on it that will contain a fresh count.

Not only that, the belt is the waste toner receptable or has the waste of the toner inside, once it fills up you start having squeaking coming from the belt as well, if it says to change it then do so, its a bit costly, best place is to look on ebay, you might get lucky.


Good luck

Arcadian