Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    Senior Tech 250+ Posts
    Join Date
    Dec 2007
    Posts
    474
    Rep Power
    40

    OKI C-5650 error 980 problem

    replaced fuser, worked for two weeks and now same error 980. I am a printer tech but never have I worked on these brands. I called support and they said there is no patch and I should take it in for service. I didnt tell her I was service. That was funny. Is there a common problem with these machines, should I clear NVRAM ? any firmware upgrades etc. ? Is it not shutting down the heater and blowing the thermal fuse etc.
    Thanks.

  2. #2
    Field Supervisor 1,000+ Posts Eric1968's Avatar
    Join Date
    Jan 2009
    Location
    Rotterdam, Netherlands
    Posts
    2,460
    Rep Power
    72

    Re: OKI C-5650 error 980 problem

    If you replaced the Fusing Unit with a new one and it didn't work, next step is to replace the Power Supply. NEVER do a NVRAM Clear on these machines! I've seen people do this. You'll end up with replacing the Controller Board and Engine Board.

  3. #3
    Service Manager 5,000+ Posts
    OKI C-5650 error 980 problem


    Join Date
    Jan 2006
    Location
    Las Vegas, NV
    Posts
    9,940
    Rep Power
    153

    Lightbulb Re: OKI C-5650 error 980 problem

    This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from

    Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


    Paul@justmanuals.com

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here