Originally Posted by
Rocini.jr
Hello,
I'm an MGI tech, outside USA, but I saw this problem before on a DP-60.
After expending hours in this issue, I found the problem. There are some gears (unidirecional) in the paper exit that usually does this bad functioning.
And, the worst... this can be an intermitent problem... sometimes the machine works, sometimes not.
I recommend you contact MGI in Florida to buy the gears and the bearings (there are 3 gears and 4 bearings) for the paper exit.
I can put you in contact with the guys there, if you want....
Best Regards.
Bookmarks