Thanks:
0
Likes:
0
Dislikes:
0
-
Trusted Tech
50+ Posts
- Rep Power
- 29
Xerox Workcentre 7220 won't boot up
Hi everyone,
I have a problem with Xerox Workcentre 7220.
The machine doesn't boot up. After about 15 minutes of booting, the machine displays message : "the device is not available turn off the power to the device".
Does anyone know what could be the problem. We have try'ed shutting it down,pulling out power cable, but no luck.
Thank you in advance...
-
Technician
- Rep Power
- 31
Re: Xerox Workcentre 7220 won't boot up
-
Trusted Tech
50+ Posts
- Rep Power
- 29
Re: Xerox Workcentre 7220 won't boot up
Originally Posted by
gnr115
Firmware Alboot
gnr115, thank you for a quick reply.
I've managed to upload new firmware via USB drive using ALTBOOT like you suggested, but no luck, the same problem persists.
The machine trys to boot for few minutes, than the screen goes black, and when the boot screen reapers, for the first second there are white horizontal bars
all over the screen. Most likely it's a hardware issue ???
Is there anything else I could do ?
-
Trusted Tech
50+ Posts
- Rep Power
- 29
Re: Xerox Workcentre 7220 won't boot up
The machine is working after all.
I just left it boot for about 20 mins after upgrade. And now its working.
Thank you very much gnr115 for your help.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks