Thanks Thanks:  0
Dislikes Dislikes:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 12
  1. #1
    Senior Tech 250+ Posts
    Join Date
    Jul 2008
    Location
    ashford
    Posts
    337
    Rep Power
    36

    lexmark c4150 please wait

    Im looking for some help with an lexmark c4150 that when you power up it will get halfway into loading up then stops with busy please wait on the screen .
    we are mainly aricoh dealer and have been selling lexmarks for a few years and never had this problem.
    any pointer please.

  2. #2
    Service Manager 10,000+ Posts
    lexmark c4150 please wait

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    22,656
    Rep Power
    658

    Re: lexmark c4150 please wait

    Quote Originally Posted by slot View Post
    Im looking for some help with an lexmark c4150 that when you power up it will get halfway into loading up then stops with busy please wait on the screen .
    we are mainly aricoh dealer and have been selling lexmarks for a few years and never had this problem.
    any pointer please.

    so does it kick an error?

    what have you done?

    1st thing to try on ANY unit that is doing this:

    1) pull all wire harnesses of the boards and reseat

    2) flash firmware.

    3) check life of consumables... replace and that are needed.

  3. #3
    Senior Tech 250+ Posts
    Join Date
    Jul 2008
    Location
    ashford
    Posts
    337
    Rep Power
    36

    Re: lexmark c4150 please wait

    thank for the reply the printer is only a few months old so the parts are all still new .
    there are no error cods it just gets half way through loading the screen and stops saying busy please wait i will get a good look at it in the workshop tomorrow if needs be i will contack Lexmark help desk and seeif they go down the board route.

  4. #4
    Field Supervisor 500+ Posts
    lexmark c4150 please wait

    dalewb74's Avatar
    Join Date
    Feb 2018
    Posts
    875
    Rep Power
    29

    Re: lexmark c4150 please wait

    unplug any cables on the back like usb and network cables. then reboot and see if it will power all the way up then.

  5. #5
    Master Of The Obvious 10,000+ Posts
    lexmark c4150 please wait

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,442
    Rep Power
    462

    Re: lexmark c4150 please wait

    Quote Originally Posted by Phil B. View Post
    so does it kick an error?

    what have you done?

    1st thing to try on ANY unit that is doing this:

    1) pull all wire harnesses of the boards and reseat

    2) flash firmware.

    3) check life of consumables... replace and that are needed.
    Not listening? =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  6. #6
    Service Manager 10,000+ Posts
    lexmark c4150 please wait

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    22,656
    Rep Power
    658

    Re: lexmark c4150 please wait

    Quote Originally Posted by blackcat4866 View Post
    Not listening? =^..^=
    guess not.. but like most.. " must be a board"

  7. #7
    Field Supervisor 500+ Posts
    lexmark c4150 please wait

    dalewb74's Avatar
    Join Date
    Feb 2018
    Posts
    875
    Rep Power
    29

    Re: lexmark c4150 please wait

    are you able to boot into the diagnostic menu? sometimes you can do this when it won't load the normal way.

  8. #8
    Senior Tech 250+ Posts
    Join Date
    Jul 2008
    Location
    ashford
    Posts
    337
    Rep Power
    36

    Re: lexmark c4150 please wait

    sorry guys I don't have an answer for this problem all I can say is Lexmark has had a problem with the error and had no answer so exchanged the machine.

  9. #9
    Senior Tech 100+ Posts
    Join Date
    Feb 2010
    Posts
    218
    Rep Power
    0

    Re: lexmark c4150 please wait

    Quote Originally Posted by slot View Post
    Im looking for some help with an lexmark c4150 that when you power up it will get halfway into loading up then stops with busy please wait on the screen .
    we are mainly aricoh dealer and have been selling lexmarks for a few years and never had this problem.
    any pointer please.
    change the fuser, or hvps. seem not coming up the proper way of booting.

    please wait for warming up, or checking the temp. also i had the side door have this issue, printhead problem, (laser cable) broke.

    good luck

  10. #10
    Service Tech
    Join Date
    May 2009
    Location
    London
    Posts
    47
    Rep Power
    0

    Re: lexmark c4150 please wait

    Seems as though removing all connectors on the controller board and re-seating would be an idea. You won't be able to flash firmware if the machine is not in a ready state unless it shows up on the network and the web page displays (unlikely). Also as a previous poster suggested, removing all network connections and trying reboot again.

    Controller board comes to mind on so many Lexmarks.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here