Risograph problems

[WayneBridges1988]

Hi,

I have recently purchased a Risograph TR1510, when I went to use it the other day I started to copy the master when suddenly the machine stopped working.

The screen is now showing "E13" with a red light on the spanner icon.

Can anyone help ressolve the problem?

Many Thanks,

Wayne

[Baphomet]

Cutter motor is locked up. To reset the code you simply pull out the drum and push it back in. However, if the cutter is still jammed up the code will just return.

[WayneBridges1988]

I have just tried this, it went ok for ten seconds and then came up with error 13 again :-(

What is the cutter motor - does that cut the master or something?

Any other suggestions???

Thanks,

Wayne

[Baphomet]

Yes, it cuts the master. It needs to be repaired or replaced.

[WayneBridges1988]

Are they cheap to replace?

Are there any engineer manuals that show how to repair them?

Thanks for your help.

Wayne

[manuals4you]

Riso - products new home -

$11.77 and instant download.

Paul@justmanuals.com

[WayneBridges1988]

Hi Paul,

Does this take Visa electron???

[manuals4you]

It should.

[Elle]

hehehe this should be interesting

[techathens]

You may have to return the cutter to home (open) position manually once you remove the cutter. I have rarely had to replace the cutter units in the TR/CR lines for mechanical issue (usually replaced for blade problems - stamped metal, not drop forged), but it does happen. Let me know if you need one, I have some reconditioned cutter units from my days with RISO.