Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: ricoh mp c6000

  1. #1
    stavrator
    Guest

    ricoh mp c6000

    Hello everyone,

    I just joined this forum (although i have been reading it a lot) as i have a problem that seems noone can solve till now....hehehe
    We have an MPC6000 installed which is quite new (100k colour 36k black).
    All of a sudden the printing is a mess....Printing in colour makes the letters's edges look CMYK, meaning that i get an offset of each colour used by almost 0,001m. It wasn't doing that earlier, although the same file is used from the computer using the same software(PDF-MS Word).
    This problem gets even worse when using heavier paper.Would there be any suggestions to this?

  2. #2
    Toner Schlep 100+ Posts pspahr's Avatar
    Join Date
    May 2008
    Location
    Hendersonville, NC
    Posts
    227
    Rep Power
    35
    Funny thing---I'm in that class as we speak. I'll ask and see what we can find.....
    VectorLinux---Check it out!

  3. #3
    Toner Schlep 100+ Posts pspahr's Avatar
    Join Date
    May 2008
    Location
    Hendersonville, NC
    Posts
    227
    Rep Power
    35
    Stavrator---Could you scan in an image for us to look at?
    VectorLinux---Check it out!

  4. #4
    stavrator
    Guest

    here is a scanned print

    here is a scanned print of a printed envelope. It is supposed to be green-like letters.The file was created using the latest CorelDraw. Sorry for my late reply, but i was out of towna nd could not get the scan to send.

    Thank you in advance.
    Attached Files Attached Files

  5. #5
    Field Supervisor 500+ Posts
    ricoh mp c6000

    Herrmann's Avatar
    Join Date
    Jan 2006
    Location
    Germany, NorthRhine Westfalia
    Posts
    792
    Rep Power
    45
    at first try sp2-111 (forced line position adjustment)

    second: look for a slipping transfer belt
    If sometimes you feel a little useless, offended and depressed always remember that you were once the fastest and most victorious sperm of hundreds of millions!

  6. #6
    stavrator
    Guest

    thank u

    Quote Originally Posted by herrmann View Post
    at first try sp2-111 (forced line position adjustment)

    second: look for a slipping transfer belt

    thank you for your reply
    i will try these and let u know if it worked....
    is the transfer belt anyhow related to the media thickness??

  7. #7
    Field Supervisor 500+ Posts
    ricoh mp c6000

    Herrmann's Avatar
    Join Date
    Jan 2006
    Location
    Germany, NorthRhine Westfalia
    Posts
    792
    Rep Power
    45
    The maschine and therefore the belt speed ist related to the media thickness.
    I have seen such behavior on several canon clc 3200, so i would have a close look on it
    If sometimes you feel a little useless, offended and depressed always remember that you were once the fastest and most victorious sperm of hundreds of millions!

  8. #8
    FORMER Techie 1,000+ Posts tcs04's Avatar
    Join Date
    Apr 2009
    Posts
    1,184
    Rep Power
    43
    Quote Originally Posted by stavrator View Post
    Hello everyone,

    I just joined this forum (although i have been reading it a lot) as i have a problem that seems noone can solve till now....hehehe
    We have an MPC6000 installed which is quite new (100k colour 36k black).
    All of a sudden the printing is a mess....Printing in colour makes the letters's edges look CMYK, meaning that i get an offset of each colour used by almost 0,001m. It wasn't doing that earlier, although the same file is used from the computer using the same software(PDF-MS Word).
    This problem gets even worse when using heavier paper.Would there be any suggestions to this?

    See attached

    Clean the MUSIC sensors, these can get dirty! They will case a line position adjustment (MUSIC) error.

    Any SC codes? (Print SP5990 04)

    Could (?) be the belt speed sensors

    pspahr...

    Learn "Mirror Unit for Skew and Interval Correction"... Impress the trainer!!!!

    (Motors move the barrel toroidal lenses to adjust the image position for the COLOURS.... NOT black)
    Attached Files Attached Files

  9. #9
    Jonza
    Guest
    Hi all,
    For me that looks like a color registration error. Did you try Sp2111 (Forced Toner position)?
    I use that Sp where colors are not on the top of each other

  10. #10
    Trusted Tech 50+ Posts moonwalker3778's Avatar
    Join Date
    Jun 2008
    Location
    HYDERABAD
    Posts
    87
    Rep Power
    33
    hi friends a basically iam a konica minolta tech,ur prob common in KM color machines.u clean the MUSIC sensors said by tcs04(member).in our case we callas transfer belt image registration sensors.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here