Does anyone know if the Oce uses the same firmware as the Konica Minolta?
Does anyone know if the Oce uses the same firmware as the Konica Minolta?
Last edited by Motormount; 10-05-2011 at 07:38 PM. Reason: spelling
Highly doubtful.
It is coded completely different, so KM firmware, image units & toners won’t work in it.
Turns out the KM firmware works fine in this Oce. Just had to make a couple of dip switch settings and all is good.
It took you three years to load firmware? =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
I focus on quality.
I just asked this same question last month, and thought this was the post. Can't find it elsewhere (?). Er, maybe I asked about the C280 and Oce 2822c. Oh well, same difference.
Well, if anyone is ever interested, the Konica Minolta firmware also works in their Muratec counterparts.
Bookmarks