Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2
  1. #1
    Senior Tech 100+ Posts
    Okidata CX1145: 4 dots on prints only


    Join Date
    Sep 2011
    Location
    Milwaukee, WI
    Posts
    157
    Rep Power
    29

    Okidata CX1145: 4 dots on prints only

    We took over an account with an Okidata CX1145 copier. They are having an issue where every print has 4 dots show up along the direction of printing. The small dots are black-cyan-magenta-yellow and are always 63mm from the left edge of the paper. They do not show up in the same spot front to back (it varies - some near the top of the page and some closer to the bottom, but always 63mm from the left edge.)

    This dots never appear on copies.

    I installed PostScript driver and re-installed the PCL5c driver. The dots occur on prints from both drivers. The dots only occur when printing color.

    Our customer also told us that this machine had a major failure two years ago and their previous service company replaced all the boards.

    Anybody have any ideas on how to stop the copier from putting these four dots onto each color print?

    FUMC-PrintIssue.jpg

  2. #2
    Service Manager 5,000+ Posts
    Okidata CX1145: 4 dots on prints only


    Join Date
    Jan 2006
    Location
    Las Vegas, NV
    Posts
    9,940
    Rep Power
    153

    Lightbulb Re: Okidata CX1145: 4 dots on prints only

    This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from


    Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


    Paul@justmanuals.com

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here