develop ineo 283 has error code c 2201

[bejoyjohn]

Develop ineo 283 has an error code C 2201 on continuous copying and it has ADF, Sorter with stapler etc. When I tried with blank pages it does not show error. will anybody please tell me what is this?

[bejoyjohn]

Develop ineo 283 has an error code C 2201 on continuous copying and it has ADF, Sorter with stapler etc. When I tried with blank pages it does not show error. will anybody please tell me what is this?

hi guys I found the problem and it says toner motor having difficulty in rotating I am going to change the toner cartridge and see what happens.

[bejoyjohn]

hi guys I found the problem and it says toner motor having difficulty in rotating I am going to change the toner cartridge and see what happens.

sorry guys its not working same problem remains....
Anybody has any tips please ....

[Hansoon]

From the "Solutions List" for the identical KonicaMinolta Bizhub:

C2201 malfunction code.
Solution
CAUSE: Toner Bottle rotation problem. The bottle only turns ¼ of the way and then the MFP codes out.The drive for the motor is inhibited because the
Holder (p/n A1UD 2186 01) might be flexing. There was a batch of holders that were not "cured" enough in the factory.
This "flexing" of the holder maycause a failure of gears, the Toner Bottle motor (M3) and/or the PRCB (PWB-MC assembly). (see below photos)
SOLUTION: Check for a binding condition and correct as necessary.The holders in stock are OK so they can be used to repair machines or the complete
assembly (p/n A1UD R701 00
)can be replaced if that is easier. If required, replace both M3 (p/n A1UD R702 00) and PRCB (p/n A1UD P000 01) at the same time.
Notes :
1. Serial number cut-in:
bizhub 423: A1UD011011252~
bizhub 363: A1UE011016521~
bizhub 283: A1UF011010269~
bizhub 223: A1UG011014621~

Hans

[bejoyjohn]

From the "Solutions List" for the identical KonicaMinolta Bizhub:

C2201 malfunction code.
Solution
CAUSE: Toner Bottle rotation problem. The bottle only turns ¼ of the way and then the MFP codes out.The drive for the motor is inhibited because the
Holder (p/n A1UD 2186 01) might be flexing. There was a batch of holders that were not "cured" enough in the factory.
This "flexing" of the holder maycause a failure of gears, the Toner Bottle motor (M3) and/or the PRCB (PWB-MC assembly). (see below photos)
SOLUTION: Check for a binding condition and correct as necessary.The holders in stock are OK so they can be used to repair machines or the complete
assembly (p/n A1UD R701 00
)can be replaced if that is easier. If required, replace both M3 (p/n A1UD R702 00) and PRCB (p/n A1UD P000 01) at the same time.
Notes :
1. Serial number cut-in:
bizhub 423: A1UD011011252~
bizhub 363: A1UE011016521~
bizhub 283: A1UF011010269~
bizhub 223: A1UG011014621~

Hans

thank you it works thank you very much

[Big Joe]

This solution solved my c-2201 codes Thanks