Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 5 of 5
  1. #1
    Service Manager 1,000+ Posts
    Oki 5502 advice : RUN


    Join Date
    Feb 2010
    Posts
    1,986
    Rep Power
    75

    Oki 5502 advice : RUN

    and don't look back

  2. #2
    Master Of The Obvious 10,000+ Posts
    Oki 5502 advice : RUN

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,434
    Rep Power
    462

    Re: Oki 5502 advice : RUN

    There has got to be a story behind this. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  3. #3
    I can turn a screw... 250+ Posts pacman's Avatar
    Join Date
    Apr 2009
    Location
    Phoenix, AZ
    Posts
    306
    Rep Power
    34

    Re: Oki 5502 advice : RUN

    We have a few of these out there. We haven't had any issues whatsoever other than one that was defective out of the box. SO FAR it's been set em and forget em.

  4. #4
    Trusted Tech 50+ Posts
    Join Date
    Jul 2008
    Posts
    92
    Rep Power
    32

    Re: Oki 5502 advice : RUN

    We sell the Toshiba variant, we have several where the slit glass gets deep scratches in it and you have to replace the whole scanner bed at a cost of $600.00 and it takes hours to replace. Also who's bright idea was it to cause the machine to stop operating when a part reaches its life expectancy??

  5. #5
    Master Of The Obvious 10,000+ Posts
    Oki 5502 advice : RUN

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,434
    Rep Power
    462

    Re: Oki 5502 advice : RUN

    Quote Originally Posted by bryand View Post
    We sell the Toshiba variant, we have several where the slit glass gets deep scratches in it and you have to replace the whole scanner bed at a cost of $600.00 and it takes hours to replace. Also who's bright idea was it to cause the machine to stop operating when a part reaches its life expectancy??
    We also have the Toshiba rebadges. Like most other Oki's the color is richly saturated, the consumables are expensive, and it was never really designed to be taken apart. Who's brilliant idea was it for the scanner to tip over on it's side, and to be balanced on those two slender pillars?
    The consumables are very easy to change, if you can get your keyop to try it. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here