Page 1 of 2 12 LastLast
Results 1 to 10 of 11
  1. #1
    Senior Tech 100+ Posts
    Join Date
    May 2008
    Location
    malibu
    Posts
    102
    Rep Power
    0

    oce plotwave 300 manual service

    hi fellas .
    is there anybody have oce plotwave 300 manual service in exchange money ???

  2. #2
    RTFM!! 5,000+ Posts allan's Avatar
    Join Date
    Apr 2010
    Location
    Centurion
    Posts
    5,372
    Rep Power
    151

    Re: oce plotwave 300 manual service

    U need lotus notes and licensing only the Oce training people give out.

  3. #3
    Technician
    Join Date
    Aug 2011
    Location
    ferd
    Posts
    22
    Rep Power
    0

    Re: oce plotwave 300 manual service

    Quote Originally Posted by allan View Post
    U need lotus notes and licensing only the Oce training people give out.
    hi ..
    u have this lotus notes and licensing plotwave300

  4. #4
    RTFM!! 5,000+ Posts allan's Avatar
    Join Date
    Apr 2010
    Location
    Centurion
    Posts
    5,372
    Rep Power
    151

    Re: oce plotwave 300 manual service

    Quote Originally Posted by copyplan View Post
    hi ..
    u have this lotus notes and licensing plotwave300
    Time have changed. Its now under Canon and the manuals have been converted to PDF as far as I know. And no I can't help you with that.
    Whatever

  5. #5
    Trusted Tech 50+ Posts Quatro's Avatar
    Join Date
    Dec 2015
    Posts
    61
    Rep Power
    17

    Re: oce plotwave 300 manual service

    Hi,

    They using the Porthos application.
    Send me your email maybe I can help.
    You will be able to see the manual for but you will not be able to reset the permanent errors.

  6. #6
    Technician
    Join Date
    Dec 2022
    Location
    Burnaby, BC
    Posts
    12
    Rep Power
    4

    Re: oce plotwave 300 manual service

    Quote Originally Posted by Quatro View Post
    Hi,

    They using the Porthos application.
    Send me your email maybe I can help.
    You will be able to see the manual for but you will not be able to reset the permanent errors.
    I just purchased a used PlotWave 300 and I'm finding the print quality is inconsistent across the width of the paper, being somewhat faded in same areas. this is with the Test Prints. I've tried adjusting the density 5% which made no visible difference, and I did the Print Density test and set that offset to +4. Still faded in the same areas. Toner appears to be almost full. No error messages.

    I'd like the service manual so I can do more of the maintenance on this machine. I figure this is a relatively straightforward service (I hope) that would be clear in the manual. At least the passwords are all default!

    Not unlike my KIP 2900/2710 that I ran for ten years until it finally packed it in due to seals and wipers failing and no more replacement parts were available. It has left the building so no longer can I be annoyed with that machine! Anyone looking for spares for that KIP, as I have toner, developer, and a number of spare parts...

    Thanks!

    John :-#)#

  7. #7
    Service Manager 10,000+ Posts
    oce plotwave 300 manual service

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    22,606
    Rep Power
    658

    Re: oce plotwave 300 manual service

    Quote Originally Posted by JRR View Post
    I just purchased a used PlotWave 300 and I'm finding the print quality is inconsistent across the width of the paper, being somewhat faded in same areas. this is with the Test Prints. I've tried adjusting the density 5% which made no visible difference, and I did the Print Density test and set that offset to +4. Still faded in the same areas. Toner appears to be almost full. No error messages.

    I'd like the service manual so I can do more of the maintenance on this machine. I figure this is a relatively straightforward service (I hope) that would be clear in the manual. At least the passwords are all default!

    Not unlike my KIP 2900/2710 that I ran for ten years until it finally packed it in due to seals and wipers failing and no more replacement parts were available. It has left the building so no longer can I be annoyed with that machine! Anyone looking for spares for that KIP, as I have toner, developer, and a number of spare parts...

    Thanks!

    John :-#)#
    have you tried posting your problem in https://www.copytechnet.com/forums/digital-duplicators/

  8. #8
    Trusted Tech 50+ Posts Quatro's Avatar
    Join Date
    Dec 2015
    Posts
    61
    Rep Power
    17

    Re: oce plotwave 300 manual service

    Quote Originally Posted by JRR View Post
    I just purchased a used PlotWave 300 and I'm finding the print quality is inconsistent across the width of the paper, being somewhat faded in same areas. this is with the Test Prints. I've tried adjusting the density 5% which made no visible difference, and I did the Print Density test and set that offset to +4. Still faded in the same areas. Toner appears to be almost full. No error messages.

    I'd like the service manual so I can do more of the maintenance on this machine. I figure this is a relatively straightforward service (I hope) that would be clear in the manual. At least the passwords are all default!

    Not unlike my KIP 2900/2710 that I ran for ten years until it finally packed it in due to seals and wipers failing and no more replacement parts were available. It has left the building so no longer can I be annoyed with that machine! Anyone looking for spares for that KIP, as I have toner, developer, and a number of spare parts...

    Thanks!

    John :-#)#

    Hi,

    Will you be able to share a picture of the issue.
    It might have dirt on print head,

  9. #9
    Technician
    Join Date
    Dec 2022
    Location
    Burnaby, BC
    Posts
    12
    Rep Power
    4

    Re: oce plotwave 300 manual service

    Quote Originally Posted by Quatro View Post
    Hi,

    Will you be able to share a picture of the issue.
    It might have dirt on print head,
    I moved it to:OLE PlotWave 300 - light bands (lenghtwise) in prints...

    I couldn't upload a photo of the results test scan so provided a link.

    I suspect dirt on the LED array, but don't know how to clean it safely without a service manual...

    Thanks!

  10. #10
    Trusted Tech 50+ Posts Quatro's Avatar
    Join Date
    Dec 2015
    Posts
    61
    Rep Power
    17

    Re: oce plotwave 300 manual service

    Quote Originally Posted by JRR View Post
    I moved it to:OLE PlotWave 300 - light bands (lenghtwise) in prints...

    I couldn't upload a photo of the results test scan so provided a link.

    I suspect dirt on the LED array, but don't know how to clean it safely without a service manual...

    Thanks!
    Hi,

    Have you solved this issue

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here