Error codes 11506 and 13521 on Oce 2500

[prasad]

11506 unexpected logical connection loss with the print engine Mainnode Power & Control PBA, 22PBA01, Ethernet cable defective Error message 13521 - PEMOUTMO 13M89 speed error Start the SDS test of the output motor 13M89 Error message 22544 - 2250044 Communication error PIM2 node PIM-node, 12PBA01, - PIM2 Local Node Control PBA Swapping IIM from other machine.

1. Having consistent issues with jamming in the Stacker
2. Print gets to the flip wheel and stops and the printer doesn't recognize that it stop and continues to print
3. Eventually the printer will error out with a 11506 or 21530 and 2250044, 2250015, 13521

We have done the following:

1. Replaced all the main boards on the print engine.
2. Replaced the IMM.
3. Replaced the Main Node and all local nodes.
4. The sensors in the registration unit along with the internet cables have been replaced.
5. 13521 code was resolved but the machine continues to exhibit the 11506 code when attempting to output a print followed by a 25701.

[prasad]

11506 unexpected logical connection loss with the print engine Mainnode Power & Control PBA, 22PBA01, Ethernet cable defective Error message 13521 - PEMOUTMO 13M89 speed error Start the SDS test of the output motor 13M89 Error message 22544 - 2250044 Communication error PIM2 node PIM-node, 12PBA01, - PIM2 Local Node Control PBA Swapping IIM from other machine.

1. Having consistent issues with jamming in the Stacker
2. Print gets to the flip wheel and stops and the printer doesn't recognize that it stop and continues to print
3. Eventually the printer will error out with a 11506 or 21530 and 2250044, 2250015, 13521

We have done the following:

1. Replaced all the main boards on the print engine.
2. Replaced the IMM.
3. Replaced the Main Node and all local nodes.
4. The sensors in the registration unit along with the internet cables have been replaced.
5. 13521 code was resolved but the machine continues to exhibit the 11506 code when attempting to output a print followed by a 25701.

The problem is resolved by loading the system software.