Dear
my copier Panasonic DP 8016 shows key without any incacations..
may you help me about please.
regards
Dear
my copier Panasonic DP 8016 shows key without any incacations..
may you help me about please.
regards
Get into F8-06 mode to check for error codes. Also check your counters, it could be a 85k maintenance reminder....
thanks v.much. I will try to do it
thanks again
Is it showing key or a wrench symbol. If is the wrench, then as onetek says, it usually a pm item. If the machine is working fine then go in service mode F7 and change drum count, pm count and dev to 0. Also i would set F5-70 To 0 so as to not to pm. With these machines, let it run till the customer call for service and check the machine and see what needs replacing.
THE ONLY THING FOR EVIL TO TRIUMPH IS FOR GOOD MEN TO DO NOTHING..........edmund burke
Bookmarks