Thanks:
0
Likes:
0
Dislikes:
0
-
Panasonic FP 7818
I have a Pan 7818 where the waste toner builds up in a pile in the middle of the drum unit behing the cleaning blade. The coil is turning and dumping some waste into the waste bottle. I vac it out and everything is OK then it happens again after a few weeks. I have seen this problem in the past and can't remember if Pan resolved it.
-
Technician
- Rep Power
- 31
They did resolve it with mylars that would clean the auger. Or knock the toner off the auger that is, so the toner wont build up on the auger. I have no idea if they still sell that mylar or even the part number. But i am sure that is something you can make yourself if need be.
Good luck Robert
-
Toner
Cheers Rob, It has the mod fitted.
-
It does that when the middle of the mylar come unglued (even slightly)....Panasonic calls this part "loop mylar" pn# FFPHK1068B. Th.
-
Thanks for the tip. I'll check that on my next visit.
-
7818
you need a toner support its a strip of plastic that peels off and you put a new one on it i also know that its could be heat thats causeing your prob take out the fan filters and this helps
-
Hi Garren, thanks for the info. The support strip is OK I checked it, but the heat could be a problem, Small office with quite a bit of kit in there running all day.
-
Garren is right on about the heat. Years back, we had about 10 machines doing this 18cpm - 50cpm. Remove the exhaust filters above the fuser.
Greg
-
Many thanks for your help.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks