Thanks:
0
Likes:
0
Dislikes:
0
-
panasonic DP-3510 e03-40
-
Senior Tech
100+ Posts
- Rep Power
- 0
E3-40 - Copy Density Sensor output adjustment
1. Sensor connector is disconnected.
2. Sensor is defective.
3. SPC PCB connector is disconnected.
4. SPC PCB is defective.
Hope that helps.
-
Trusted Tech
50+ Posts
- Rep Power
- 35
e-3-40
-
Technician
- Rep Power
- 39
You can turn off F5-25 in a pinch if you need to wait on parts.
Clutch
-
Trusted Tech
50+ Posts
- Rep Power
- 35
black density error
just to add that when the copier is allowed to operate under low toner (u13) condition, developer is depleted quickly , and when toner is replaced, the machine will overtone and results in a dirty machine. We have converted all high speed 35xx-60xx series copier back to using OEM toner. This drop the frequency of e3/40 calls to almost zero. If youb are using katun or densi toner , be sure to leave a spare bottle and change the function to " STOP" when toner is out.
-
Senior Tech
100+ Posts
- Rep Power
- 0
1. Clean inside the machine
2. Change the developer if needed
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks