Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 5 of 5
  1. #1
    Technician tommygun's Avatar
    Join Date
    May 2010
    Location
    north qld
    Posts
    21
    Rep Power
    29

    1820 not feeding from bypass

    i have an 1820 where the solenoid that releases the paper feed clutch is not acitivating after the first page is through, it works once than decides not to, i have to take out the duplex guide reset everything and than it happens all over again, any help would be welcomed because i am stumped, thanks.

  2. #2
    Senior Tech 100+ Posts suckis's Avatar
    Join Date
    Dec 2006
    Location
    Thessaloniki
    Posts
    166
    Rep Power
    0
    I had several problems with 1520/1820s' bypasses. Most of them had to do with the bypass feed clutch (the spring inside the clutch was faulty).
    ! RTFM !
    My site: http://www.e-club.gr/

  3. #3
    Senior Tech 100+ Posts
    Join Date
    Apr 2007
    Location
    Islamaabad
    Posts
    131
    Rep Power
    0
    replace the spring inside the clutch,it is faulty

  4. #4
    Technician tommygun's Avatar
    Join Date
    May 2010
    Location
    north qld
    Posts
    21
    Rep Power
    29
    thanks guys it worked i ordered one ages ago and only just recieved it

  5. #5
    Senior Tech 100+ Posts suckis's Avatar
    Join Date
    Dec 2006
    Location
    Thessaloniki
    Posts
    166
    Rep Power
    0
    Thank you foro your reply tommygun.
    ! RTFM !
    My site: http://www.e-club.gr/

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here