Thanks:
0
Likes:
0
Dislikes:
0
-
Panasonic DP-C264 J18
any 1 came across an issue with a Panasonic DP-C264 with J18
the lead edge of the paper is touching the 1st set of feed tyres after its left the paper pickup unit, this is only happening with tray 1
all other trays work fine
i've replaced all tyres
cleaned ohp sensor & mirror
Cleaned registration sensor
scrubbed feed tyres
replaced complete paper pickup unit inc loom
replaced ohp & registration pcb and loom & plastic assembly
kicked it.!!
lubricated all shafts relating to the feed & reseat all earth contacts for the door that covers the 1st set of feed tyres
removed and adjusted the shelf that lifts the paper against the paper tyres
any idea's lol
-
ok i have a theory
it may be the feed clutch located behind the main sc board,
even though the clutch provides drive for both feed tyes 1 and 2 , the 2nd feed tyres are driven from the cluch by a belt, but the gear size is smaller which may cause less tension when the paper hits them,
-
Junior Member
- Rep Power
- 0
Have you tried dropping it from a very high building ken.
-
Cmon marra u know how heavy those things are m8 lol
-
Just to confirm, that its been a week and since the clutch was fitted, the machine has not repeated the fault
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks