Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 7 of 7
  1. #1
    Service Manager 100+ Posts
    Panasonic Workio DP 3530 code E05-11

    jcontractor's Avatar
    Join Date
    Aug 2010
    Location
    Aguadilla, PR
    Posts
    247
    Rep Power
    21

    Panasonic Workio DP 3530 code E05-11

    Hi,

    I have a Panasonic DP 3530 with E05-11 Error code,
    I notice a legal paper behind the legal paper tray, all crushed.
    A lose sensor flag behind the paper tray (like a semi-circule sensor flag); the one witch sense the paper lower, intermediate and upper level when the paper tray is closed. It detects like a movement in the paper lift mechanism.
    This flag moves inside a series of sensors behind the paper tray, between the paper tray and the machine, near the paper lift mechanism inside the machine.

    I remove the paper, place the sensor flag in it's original position, and I simulate the paper tray in it's position.
    I notice that the gear that suppose to lift the paper doesn't move at all. The machine only gave me the same error time after time.
    It is some trouble reset code for this equipment?

    It is usual that paper lift mechanism to fail or I'm forgot (missing) something to check?

    Thanks in advance everyone.

  2. #2
    ESTANISLAOWENENTON
    Guest

    Re: Panasonic Workio DP 3530 code E05-11

    hello

    same thing happened to me 2 times

    the first time and ready to change the spc
    the second a technician and took her under
    the very dog that did not tell me

    but if you look at the fuses check them TARGET

  3. #3
    Service Manager 100+ Posts
    Panasonic Workio DP 3530 code E05-11

    jcontractor's Avatar
    Join Date
    Aug 2010
    Location
    Aguadilla, PR
    Posts
    247
    Rep Power
    21

    Re: Panasonic Workio DP 3530 code E05-11

    Quote Originally Posted by ESTANISLAOWENENTON View Post
    hello

    same thing happened to me 2 times

    the first time and ready to change the spc
    the second a technician and took her under
    the very dog that did not tell me

    but if you look at the fuses check them TARGET
    Thanks for the advice.

  4. #4
    The Wolf 1,000+ Posts mojorolla's Avatar
    Join Date
    Jan 2010
    Location
    C-town
    Posts
    1,728
    Rep Power
    56

    Re: Panasonic Workio DP 3530 code E05-11

    This error can mean the F1 fuse on the SPC is blown. You should also check the wiring harnesses for trays 1 and 2 as they can pinch and cause this error. Also, a slight chance of a bad SC, but almost always the SPC pwb. You could try unplugging both feed heads and see if the error goes away. If it does not go away, you probably have a bad SPC. If the error does not show up with trays unplugged, you have a bad wire somewhere.
    Failing to plan is planning to fail!!!

  5. #5
    Service Manager 100+ Posts
    Panasonic Workio DP 3530 code E05-11

    jcontractor's Avatar
    Join Date
    Aug 2010
    Location
    Aguadilla, PR
    Posts
    247
    Rep Power
    21

    Re: Panasonic Workio DP 3530 code E05-11

    Quote Originally Posted by mojorolla View Post
    This error can mean the F1 fuse on the SPC is blown. You should also check the wiring harnesses for trays 1 and 2 as they can pinch and cause this error. Also, a slight chance of a bad SC, but almost always the SPC pwb. You could try unplugging both feed heads and see if the error goes away. If it does not go away, you probably have a bad SPC. If the error does not show up with trays unplugged, you have a bad wire somewhere.
    I really appreciate your advice.

  6. #6
    ESTANISLAOWENENTON
    Guest

    Re: Panasonic Workio DP 3530 code E05-11

    Quote Originally Posted by jcontractor View Post
    Thanks for the advice.
    that's the fuse
    RATE ME with 10 stars

  7. #7
    Junior Member
    Join Date
    Sep 2017
    Location
    DG Khan
    Posts
    1
    Rep Power
    0

    Re: Panasonic Workio DP 3530 code E05-11

    hello experts
    i am here to discuss the same problem
    please guide me where is the location of SPC for fuse checking.
    1st i was getting U7 Error.

    i disconnect the sensor and power on the Machine.
    now i am getting E05-11

    thanks in Advance

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here