Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3

Thread: Dp 2330 j19

  1. #1
    Senior Tech 100+ Posts otuvak's Avatar
    Join Date
    Aug 2010
    Location
    Silver Spoon
    Posts
    102
    Rep Power
    29

    Dp 2330 j19

    having trouble with this machine getting j19s. Replaced actuator sensor above reg roller and ran 150 duplexed copies with no jams...hmmm..prob solved. Hour later get a call back saying it's doing it again. Replaced duplex clutch ran 75 with no jams. Hour later call saying it's doing it again. Had them use just letter-r tray and not getting any problems. Later in the day they used letter tray again for 2-2 (65 copies) with no problems. Looking for some suggestions! Thanks for reading..

  2. #2
    USMC 50+ Posts
    Dp 2330 j19

    Billy Bob's Avatar
    Join Date
    May 2011
    Posts
    51
    Rep Power
    0

    Re: Dp 2330 j19

    ive had a few of these, try cleaning all rollers and drive gears, bushings on door .

  3. #3
    The Wolf 2,500+ Posts mojorolla's Avatar
    Join Date
    Jan 2010
    Location
    Cleveland OH
    Posts
    2,512
    Rep Power
    125

    Re: Dp 2330 j19

    Check the four screws on the underside of the fuser. If the front screw is the wrong one, it catches the duplex / transfer baffle. It is the one without the washer.
    The registration sensor is below the reg roller. The code means its not making it from duplex 4 to the reg sensor. Check the pinch rolls and spring are still there.
    LT-R always runs better it seems, especially on heavier stock.

    Failing to plan is planning to fail!!!

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here