Hello ..l have error code E03-40 in PANASONIC DP6010 pls can anyone help me or sent me her sm in my email : mecanographe@gmail.com
Hello ..l have error code E03-40 in PANASONIC DP6010 pls can anyone help me or sent me her sm in my email : mecanographe@gmail.com
BEST TECHNICIAN . NICE PEOPLE .
E3-40 is a bad sensor in the DV unit or a bad SPC board.
Failing to plan is planning to fail!!!
[QUOTE=zaza;261959]thx my friend ..but it have any other raison for this problems like the developer is bad ? pls l need the service manuals for this machine ?[/Q
this code is the image sensors
are in the drum unit
recovery blade is damagedUOTE]
Your copy density sensors have toner on them.They are located under the rear side of the drum. You will need to replace the toner scoop, side seals, cleaning blade and possibly drum.Also if your dev is old and copier overtoned, you will have to replace the dev.
Th.
My bad, I was thinking of the 80 series where the sensor is removed! Good thing onetek and ESTAN are on top of it.
Failing to plan is planning to fail!!!
Bookmarks