It says in the service manual that this is an error caused by 5 jams in a row. I checked the #1 and #2 sensors and there does not seem to be a problem. I went through the service mode F1-F9 and there does not seem to be a way to reset it. The customer experienced the problem while running the machine. Not sure what is wrong with this beast... Any ideas are very welcome... Thanks so much !!
In F9 select "parameter initialize" then go to LBP Fuser reset. Wait for prompt to power off/on and you're good to go.
THANKYOU SO MUCH !!!Originally Posted by yakyitz
Posting Permissions
Thanks: 
Likes: 
Dislikes: 
Reply With Quote
Bookmarks