Like for instance how it's jamming in the duplexer which actually turns out to be the document feeder.
Like for instance how it's jamming in the duplexer which actually turns out to be the document feeder.
"Some days you get the bear, some days the bear gets you."
Cdr. William Riker
"When I feed my originals they come out with spots"
Originals fed through the bypass. Dumbass!!@
Like the United States Postal Service It's a miracle it works!
"Machine is jammed and we can't find it".
When I arrive at the customers a couple of hours later there is a red light and message on the screen saying 'add paper'.
- Knowledge not shared, is eventually knowledge that becomes lost... like tears in the rain.
Fully qualified technician for Ricoh - Canon - Sharp - HP - Brother
Machine is down and "locked up"
Get there and the "Toner Light is on"
At a GM location: Mita DC111 spread out over two 8' conference tables. The engineer hands me an AC power transformer and says "This is the problem...."
=^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
You probably couldn't charge them because they were a major national account right?
And i am real sure that wasn't the problem.
"Some days you get the bear, some days the bear gets you."
Cdr. William Riker
The HP Printer is smoking something burned inside.. Found out that the paper in high humid condition when pass to the fuser it creates look like a smoke.
Senior Technician Specialist
A+; Network+
Copier Brand handled: Canon, Lanier, Konica Minolta, Sharp, Ricoh, Kyocera Mita, Nashuatech, Ollivetti, Toshiba
Printer Handled: Canon, HP, Epson, Brother, Samsung
Duplicators: Risograph, Duplo
You got it jimbo. Major Account, not billable, and it wasn't the AC power transformer. I honestly have no idea what the problem was. The drum was light shocked, developer spilled on the table.
I was fairly new to copiers, and I didn't know where to put that transformer back to without a manual. It took over a day to get it reassembled and running.
=^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Can I make a copy? When the copier is in pieces.
Like the United States Postal Service It's a miracle it works!
"Can I make a copy? When the copier is in pieces"
But it's just one copy
Bookmarks