its a bit odd that posts that have the word print in the title are only viewed in printer mode and cannot be replied to.
there has to be some VB policy to change to stop that no?
i saw one poster advise to spell it printt to get it into a working thread but this is kinda strange and i cannot see any mods or admins since i dont know how to contact them.
Here ya go:Originally Posted by Synthohol
http://www.copytechnet.com/forums/si...and-questions/
Be aware, Aneurysm is a pretty busy person herding all of us cats and may not get back to you right away.
I have have a pretty simple solution. Change any one letter in the word "print", or place it anywhere in the title except the end. Is that too difficult?
It's an issue that's been around for a very long time. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Be aware, Aneurysm will not be able to do anything as it is not an admin setting. It is the forum software that is used by this, and other forums such as the one Ricoh has. You might be able to get them software writer to rewrite with the change you want if you have enough money to pay for it. You would then have to convince Aneurysm that the update is absolutely necessary. That will be no small task considering what has transpired the last 2 times he has had to reload software, once for an update and once because we were hacked. It was not pretty.
Posting Permissions
Thanks: 
Likes: 
Dislikes: 
Reply With Quote
Bookmarks