Someone else posted a "Man's Lamp" picture.
This is a Lamp that my grandfather built (1 of 7) after his time working for the Utilities Department in our home town. Everything internally still spins and does it's thing.
Here is a STK-driver from a copier in action, in preparation for my all copier part CNC scriber/plotter/router.
Wow here again making PCB with the scribing route. Still blows my mind!
Whatever
Here is a real nice online circuit simulator.
Anyone who like electronics or would like to learn this online app is awesome.
Online circuit simulator & schematic editor - CircuitLab
Whatever
Inauguration to the "AI cancel-culture" fraternity 1997...
[] |N | | o | M | Δ | t | π | | x | []
Finally finisher the Ozone generator prototype thing.
Still need to do the Arduino stuff for PWM control and a timer.
It works great, better than I imagined.
Made from mostly scrap!
Includes:
Flyback transformer from a broken PC CRT.
Scanner lamp driver from a C360.
Toner pump from a B1250.
Fans from a xerox know knows what.
A 24volt supply.
PC PSU wiring and switch.
The cracker tube is made from a piece of 36mm 304 stainless pipe off cut and a TIG electrode.
3D printed the other bits.
Run of an oxygen bottle for medical stuff like ozonated water or low level exposure.
Got the "air pump" for disinfecting rooms and getting rid of bad odors.
The cigarette smell was removed from my car in 2 hours!!
IMG-20190318-WA0004.jpgIMG-20190318-WA0007.jpgIMG-20190318-WA0009.jpg
Useful thing to have.
Whatever
Regtig baie goed, Allan!
Hans
" Sent from my Intel 80286 using MS-DOS 2.0 "
Bookmarks