This machine has only just been through a refurb at our workshop..........some apprentice is going to get a kick from me in the morning!!WP_20160816_13_24_14_Pro.jpg
I was sent to look at the machine at the customer`s offices..it was jamming!
This machine has only just been through a refurb at our workshop..........some apprentice is going to get a kick from me in the morning!!WP_20160816_13_24_14_Pro.jpg
I was sent to look at the machine at the customer`s offices..it was jamming!
Last edited by minimerlin; 08-16-2016 at 10:02 PM. Reason: additions
Please do not PM me without asking first.
oh good lord. i wont even use those, all 3 get A00J563600's the finned ones wear out way too fast.
that's funny though.
Paper requires some serious separation!
I thought this is how you get a machine to feed multi pages. Who needs separation !!!
I have used the ribbed rollers on the biz C203 series for the Pick up and they have worked much better than the original P/U roller. The K/M rollers wear out so fast. The service manual maint list has replacement for P/U, Feed & Sep done every 300,000. This is absurd! Lucky if you get 100,000 out of the original rollers.
Really strange is I have had the older B&W models, i.e. biz 200 series, etc that I never had to replace rollers in the paper drawers, only replaced the ADF rollers.
Wasn't it checked out before going to the customer's site? It seems to me that whomever was in charge of training this apprentice, might have left out a few tools (service manual, parts manual, tech bulletins) to be used when rebuilding. This was most likely not deliberate, but more likely a lack of training IMHO.
(three pick up rollers is kind of funny though - and I'm guessing that not one manufacturer uses that setup)
"You can't trust your eyes, if your mind is out of focus" --
I did have a "fill-in set up tech" cut the 'remove this tag' (Sharp) by cutting the red ribbon, and not removing the 'lock down hardware'; 'help' does not always save you time.
"You can't trust your eyes, if your mind is out of focus" --
Lol. That's a powerful lot of pickup rollers for 1 feed unit
NEVER ASSUME ANYTHING
Ribbed for their jamming pleasure
When I started servicing copiers they used toaster ovens for fusers.....I'm old
tell the newbie to sand the two rollers next time !!!!!!!!!! see what he says
Bookmarks